ForensicBIM Knowledge Base

How can we help you?

How ForensicBIM values IFC model data, how the audit and the numbers are built, and how your files are kept secure. Practical guides for file limits and the 3D viewer are at the bottom.

No matching articles

Nothing matches that search. Try a broader term, or clear the search to see every article.

Valuation & accounting

12 articles

What the numbers mean, and how model data can be recognised and capitalised on the balance sheet.

Executive guide to the value of BIM data

A strategic guide for CFOs, controllers, and executive leadership on understanding, defending, and accounting for the value of building models. Three regional PDF editions for Europe, the US, and Global jurisdictions.

Choosing the useful life of model data

How to choose the useful life of model data in the report (5 to 30 years for buildings, up to 50 for infrastructure), what it changes in amortisation, carrying amount and savings, and how to make the choice supportable to your auditor.

Combining the files of one asset

How the files of one building or structure are valued as one data set: how files relate, what each counts for, why the asset is worth less than the sum of its files, and what the alignment check says about a delivery.

Sending the balance sheet pack to your finance department

What the memo, workbook and evidence file hold, how your finance department imports the asset and posts the entries, and how an auditor verifies a pack.

4 ways to raise the balance sheet value of your BIM data (and which ones work)

Cost allocation, digital twin platforms, licensing and acquisitions, each rated: which raise the carrying amount, which only raise economic value, and how to reach an amount your auditor will accept.

The eleven numbers: the data value ladder

The eleven quantities that get called ‘the value of the data’, from reproduction cost to carrying amount. Cost side versus utility side, deprival value, and when data can be recognised on the balance sheet.

Operate & maintain savings: what the Savings page measures

How the data in a file saves the owner time in operation, why the yearly saving goes up and down, what O&M data readiness means, and which costs are left out.

Value at stake: what losing the data would cost

The four measured parts (re-survey, survey gap, concealed items, decisions taken without the data), the build cost, works share and error share you can set, and why the ranges are likely ranges.

Which number answers which question?

A decision guide for asset owners, controllers, BIM managers and auditors: which figure to use for the balance sheet, an impairment test, a maintenance budget or a rebuild estimate.

Why ForensicBIM works with IFC

IFC (ISO 16739) stays readable for decades. Proprietary formats carry ongoing licence costs and can drop to zero value once the software stops supporting them.

Does AI change the value of IFC data?

Why faster recreation with AI doesn’t change the carrying amount, where the value in operations sits, and why AI depends on reliable data. Includes the Waternet Amsterdam case.

ForensicBIM and the EU BIM Task Group CBA method

How the EU cost-benefit handbook’s pre-tender estimates relate to ForensicBIM’s audit and valuation of the IFC files actually delivered.

Methodology & checks

28 articles

Where the figures come from, how sure they are, and what the audit checks in every file.

The quantity check: do the Qto values match the model?

How forensicBIM compares every declared volume, area, length and dimension with the object’s own geometry, and what unit errors and measuring rules look like.

Benchmark: peer groups and percentiles

How a file is compared with similar models: peer groups by facility type, size and discipline, what a percentile means, and what a benchmark release is.

Geometric weight and the density heatmap

What triangles per object say about a model, how the weight is scored, how to read the density heatmap, and how to make a heavy model lighter.

How we measure size, and which units you see

How the size of the asset is measured from its geometry, and how the file’s units and your units setting decide what you see.

Georeferencing and the location map

How the audit checks where a model sits in the real world, the problems it detects, and how to read the location map.

Scoring versions and what changed

What changed in each scoring version, and what a new version does to your reports and to the benchmark.

The alignment check: structure and continuity

How forensicBIM tests IFC 4.3 alignments for roads, rail and bridges: design layout against geometry, gaps at every joint, and the buildingSMART alignment rules.

The risks of complex IFC geometry types

Why geometry can follow the IFC standard yet still fail on import, why data gets lost, and why forensicBIM measures downstream risk rather than mere validity.

Elements without geometry, shape reuse and copy-pasted geometry

Which elements have no shape or one that can’t be processed, how repeated objects share one definition or get copy-pasted, and which quantities have nothing behind them. How each check is scored.

Methodology overview: data, experts and standards

The benchmark of real IFC models, the expert reviews, the savings research and the accounting standards behind every score, valuation range and savings estimate.

What we check, and why

Around 50 automated checks across validity, structure, geometry, information and consistency, plus official buildingSMART validation, georeferencing, the 3D viewer and the geometry heatmap.

How sure is the estimate? Statistical confidence explained

What the confidence figure on the valuation page measures, why it doesn’t move when you change the hourly rate, and how to raise it.

What’s in the hourly rate?

What a blended rate is made of (wages, employer contributions, software licences, overheads) and which of those costs each accounting standard lets you count.

Proxies: when they are acceptable and how to make them say what they are

Why a file of generic proxies can pass the buildingSMART validation and still be unusable to an owner, when proxies are acceptable, and how classification with a URI makes them say what they are.

Passing the buildingSMART validation is not the same as good data

A file can pass the buildingSMART validation service and still be all unclassified proxies without properties. What the eight validation topics check, how forensicBIM scores them, and which checks show whether the data can be used.

Classification in IFC: systems, references, URIs and bSDD

How classification is stored in IFC, how the report checks coverage, real systems, complete codes and URIs, and what the bSDD capability asks for.

Which objects need a classification, a material and properties

Why furniture, vegetation, openings, spatial containers and virtual elements are left out of the coverage figures, how assemblies, rebar and fittings are treated, and how the rules move the scores.

Property sets: standard sets, custom sets and empty values

How the report judges properties: effective facts, standard Pset_ and Qto_ sets and their compliance, custom sets with URIs, empty values and disguised missing values.

Materials in IFC: coverage, hygiene and names

Which elements need a material and how coverage is measured, how placeholder, unused and near-duplicate materials are scored, why assemblies are left out, and what materials make possible after handover.

Spatial structure and containment

How an IFC file should organise a building, bridge, road or tunnel from project and site down to storeys or facility parts, and how the Structure page scores containment, hierarchy, sites and warnings.

Spaces: closed volumes, room areas and virtual boundaries

Whether room volumes are closed, whether the room areas in the quantity sets are plausible, and whether virtual boundaries between open-plan spaces stay virtual. Why it matters for floor areas, energy and facility management.

File header, model view definitions and schema version

What the IFC file header records, how forensicBIM reads the schema version, the model view definition (MVD), author, organisation and timestamp, and which checks score them.

The Forensic BIM score™ and its grades

How the Forensic BIM score™ is built from four data factors (completeness, richness, reliability, semantics), what grades A to E mean, and why it limits the Overall quality score. A data-quality score, not a valuation.

GlobalIds: why duplicates break handover and operations

What an IFC GlobalId is, how forensicBIM counts and scores duplicate GlobalIds, and why duplicates break asset registers, CMMS and CAFM links, BCF issues, version comparison and federation.

Names: placeholder, missing and overly long names

Which names count as placeholders or missing, when a name is overly long or symbol-heavy, how both checks are scored, and why names matter for finding assets in operation.

Overall quality, Forensic BIM score™ and interoperability risk: three questions about one file

What each of the three judgements at the top of the report measures, why they are kept apart, how to read them together and which one answers your question.

Interoperability risk: what can go wrong when someone imports your file

What the traffic light on the Scores page means, the four steps it checks, why a valid IFC file can still lose or move information on import without anyone noticing, and what to do at each level.

Capabilities: what a file is ready for

The capabilities an IFC file can earn (shown on the Capabilities page of every report), the rule behind each one, and how to share them in your showcase.

Security & privacy

4 articles

Where your files are stored and processed, which controls protect them, and what happens when you delete them.

Platform & support

6 articles

Uploading files, using the 3D viewer, plans and pricing.

Can’t find what you need?

Our IFC and valuation specialists answer questions by email, including requests for larger files, custom reports and Enterprise set-ups.